Stelvio Storage

final coat of resin — Final coat of resin without the tissue paper.
The 'box' section is designed to avoid the + cable.

showing leg that fits beside battery — Showing the leg that fits between the battery and the bodywork.

Phase Two

The rearward section. I just needed to store a foot pump in this area. A 'U' section of polystyrene was used as a divider, notched to accommodate cables and given a couple of coats of coloured epoxy resin.

velcro for pump — Velcro to secure the foot pump.
Showing cables that needed accommodating.

front piece showing cutouts — Showing the cutouts for the cables.

cut out for cables — Showing the cutouts for the cables.

Spray and Fit

Areas on show were given a quick spray.

divider fitting around cables — Cables in cutouts.

fitted — Rear divider fitted, velcroed in place.

fitted — Front divider fitted.

overview — Overview of the dividers in place, both velcroed in place.